It takes some hard work to refinish hardwood floors Chicago, but it is all worth it in the end. Whether you are looking to renovate your old home or update the current one, refinishing hardwood floors are a great way to make any space feel brand new. Are you ready to do this on your own? Follow these steps to refinish hardwood floors with professional results.
- Prepare the room
Remove all furniture, curtains, and rugs. Make sure to cover all vents and electrical boxes are taped to prevent dust from getting into it. If you are refinishing one room, you should use plastic sheeting to seal doors. Then use a pry bar to gently remove base molding. You can then remove the small piece of quarter-round and leave the rest of the baseboards in place.
- Patch and repair
For this step always check the floor for larger holes or cracks. And to repair this use wood filler and a spackle knife. If the rooms are heavily damaged, it is advised to use a trowel filler and a thinner wood filler, which can easily spread and cover large areas. However, if your floor is less damaged, it is best to use a wood patch filler on specific spots. After doing so let it dry completely before removing any debris with sand paper and buffing it.
- Applying sealer or stain
In order to carry out this step, make sure your room and floor is completely clean because debris can affect the end result. If you want the stain to penetrate the wood evenly, use a method called ‘water popping’. Mix a solution of alcohol and water and spray the floor completely with a pump sprayer. Then use a mop to distribute the solution evenly. This causes the wood grains to rise and stain well. Lastly, let it dry for 30 minutes.
- Seal the floor
After the stain is dry, we can finish by sealing the floor. This helps to prevent the floor from getting damaged by water and scratches, while also adding shine and luster to the floor. Polyurethane sealer is the most popular hardwood sealer on the Chicago market and is available in water-based or oil-based products.